Determination of physical and chemical proper

Jul 02, 2020 Leave a message

                                    

                           Determination of physical and chemical properties of silica


The physical and chemical properties of silica directly reflect the quality of silica, so it is very important to accurately determine the quality of silica. At present, the indicators of foreign manufacturers are not the same, but some important indicators recognized by each manufacturer should be measured. The most important indicators are: the indicators reflecting the primary structure, such as particle size and dispersion, specific surface area; indicators reflecting secondary structure, such as oil absorption value; and indicators reflecting surface chemistry, such as the concentration of various hydroxyl groups on the surface.

silica laboratory

a. Due to the differences in the formation conditions and the growth of particles, the particle diameter of white carbon black is not uniform.


b. The specific surface area is the index reflecting the external surface area of the powder material. For a porous powder material, the specific surface area is the sum of the surface area in the pore and the external surface area.


Generally speaking, the particle size of powder is inversely proportional to its specific surface area, so the determination of specific surface product can qualitatively reflect the particle size of powder. Because electron microscope is not available in all industrial units, the particle size of the powder can not be obtained, so the determination of specific surface area has important practical value.


c. Determination of surface hydroxyl groups exist on the surface of silica, and many applications of silica are directly related to this group. Therefore, the quantitative determination of surface hydroxyl groups is very important.



The data of surface hydroxyl groups of silica generally include total hydroxyl groups, adjacent hydroxyl groups and isolated hydroxyl groups. The latter two kinds of hydroxyl groups are combined on the surface of silica in the form of Si Oh, and the total hydroxyl groups are the sum of the bound hydroxyl groups and the hydroxyl groups in the water molecules adsorbed on the surface of silica. The data of these hydroxyl groups can be measured under different conditions. The determination conditions were as follows:


① The hydroxyl group measured by direct sampling from silica bag is the total hydroxyl content;


② The hydroxyl groups determined after silica was dried at 110 ℃ for 3 hours were binding hydroxyl groups;


③ The hydroxyl groups determined after silica was dried at 600 ℃ for 3 hours were isolated hydroxyl groups;


④ The difference between binding hydroxyl group and spacer group is adjacent hydroxyl group.

   

Contact:

JINSHA PRECIPITATED SILICA MANUFACTURING CO.LTD.

Email.: jk@jksilica.com

Add.: Gaosha Industrial Zone, Shaxian, Fujian, China

EXPORT OFFICE

Room 908, Taiwan Street No.290, Xiamen, China

Mobile/WhatsApp:+86-17850500833

Contact: Wendy Wu, Sally Jiang

Tel.:+86-592-5528715 

Fax.:+86-592-5528716 


Send Inquiry

whatsapp

Phone

E-mail

Inquiry