Application of superfine silica in plastics

Jun 09, 2020 Leave a message

                                        

                                                    Application of superfine silica in plastics


By using the high strength, high fluidity and small size effect of superfine silica, the compactness, smoothness and wear resistance of plastic products can be improved. If the surface is modified properly, the plastic can be strengthened and toughened at the same time.

PPT Silica as Micron Pulverized Abrasive

By adding silica to polyethylene, the ultrafine silica can be dispersed uniformly in the matrix by special methods, and the polyethylene composite with high wear resistance and hardness can be prepared. The surface of silica was modified by grafting polymerization, and the polymer macromolecular chain was used to effectively block the nano particles and reduce the degree of agglomeration. Then the nano-SiO2 / PP composite with excellent comprehensive properties was prepared by blending process. At the same time, the toughness of PP can be increased by about two times. If a proper amount of elastomer is added to the composite system, the impact resistance of polypropylene can be increased about 3 times while maintaining the rigidity and tensile strength of polypropylene. The analysis shows that silica and elastomer can work together to strengthen and toughen polypropylene.


Nano-SiO2 / PMMA plastics prepared by blending superfine silica into PMMA can greatly improve the properties of the materials. The notched impact strength of PMMA can be increased by more than 80% with the addition of 4%, and the composite has good optical transparency. In blends of plastics and other polymers. Silica can be added to improve the compatibility of the two phases. For example, adding silica modified by styrene or methylchlorosilane to PS and PP blends can reduce the interfacial tension, reduce the cloud point temperature and improve the compatibility of the two systems.


The brittleness of epoxy resin can be obviously improved by adding superfine silica, which can overcome the defects of material rigidity and strength reduction caused by elastomer toughening and achieve the purpose of strengthening and toughening. When the addition amount is 3wt%, the impact strength and tensile strength of the composite can be increased by 40% and 21% respectively. If nano silica is modified by coupling agent, its impact toughness and tensile properties will be increased by 124% and 30%, respectively. In addition, the hardness, wear resistance, temperature resistance and insulation properties of the products will be improved.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry