Silicon Dioxide For Battery Seperator

Silicon Dioxide For Battery Seperator

Silicon dioxide for battery seperator SiO2 is a small particle size, micropores, large surface area, high surface hydroxyl content, JK silica modified nano-silica to develop a suitable nano-silica for battery separator. Specifications: JS-185A2 Uses and functions: The nano-silicon dioxide is...

Chat Now
Product Introduction

Jinsha Precipitated Silica Manufacturing Co., Ltd. is one of the leading manufacturers and suppliers of silicon dioxide for battery seperator in China. With abundant experience, we warmly welcome you to buy high quality products made in China here from our factory. Contact us for more details.

 

                     Silicon dioxide for battery seperator

SiO2 is a small particle size, micropores, large surface area, high surface hydroxyl content, JK silica modified nano-silica to develop a suitable nano-silica for battery separator.

   Specifications:

JS-185A2


Test Methods

Properties

Units

Target Values

 (Spec Limits)

Actual Values

HG/T3065-2008

Loss on drying (2Hrs,105)加热减量

%

Max.5.0

4.65

HG/T3066-2008

Ignition loss 1000℃

灼烧减量

%

Max.7.0

3.85

HG/T3072-2008

DBP   absorption value

DBP吸收值

cm3/g

2.3-2.8

2.50

HG/T3067-2008

pH value (10%aqueous   suspension)  pH

6.0-8.0

6.84

HG/T3062-2008

SiO(Dry Basis)

二氧化硅(干基)

%

Min.96

98.0

HG/T3073-1999

BET specific surface   area

BET比表面积

m2/g

170-200

160


Soluble salt (Na2SO4)

可溶性盐

%

Max.1.5

0.71











conclusion结论

This batch of product is   qualified

Audit 审核


Analysis  分析人



Uses and functions:

The nano-silicon dioxide is added between the positive and negative electrodes, the main role is to separate the positive and negative active substances to prevent the two poles due to contact and short circuit; In addition, electrochemical reaction, to maintain the necessary electrolyte, the formation of ions Moving the channel. Diaphragm material is not conductive, the type of battery is different, the use of the diaphragm is also different. For lithium-ion batteries, because the electrolyte for the organic solvent system, the diaphragm requires the following performance.

① In the battery system, its chemical stability is good.

② Mechanical strength, long service life.

③ Organic electrolyte ionic conductivity than the aqueous solution system is low, in order to reduce the resistance, the electrode area must be as large as possible, so the diaphragm must be very thin.

④  Silicon oxide for battery separator has a good compatibility, and the battery separator slurry of a variety of solvents compatibility.

Storage:

Nano-silica should be stored in a ventilated, dry warehouse. In the transport process, to moisture, water, pressure, do not throw throwing.



Hot Tags: silicon dioxide for battery seperator China, factory, suppliers, manufacturers, buy, made in China, ShaXian Sanming

Send Inquiry

whatsapp

skype

E-mail

Inquiry

Bag